S t e r e o fet/bipolar hi-current
integrated a m p l i f i e r
Z A X design amplifier line
include two model, the ZAX-60 at 60 watt per channel at 8 ohm, and ZAX-120 at
120 watt per channel at 8 ohm.
ZAX design project is a hi-advanced technology in new era of amplifier with
new concept as intended amplifier as drive any SPEAKERS charge in any condition
of input signal!
ZAX design project is based on hi-voltage circuit (120Volt DC) and
Hi-current circuit (+/-20amp PP).
For reach this ambitious design
our engineer ask to suppliers special components as:
· Special transistors with hi-current and hi
voltage can be handle little signal (first watt control)
· Special output device transistor can handle
hi-current with special buil-in temperature compensated
· Special power ac main transformer with
hi-energy and low leackege lost flux
T h e r e s u l t s i s t h e
Z A X d e s i g n p r o j e c t !
The ZAX produce outstanding
sound quality: the FET stage give a sweet and smooth soundstage and otherwise
the hi-energy power output transistor produce right performance for detailed
high frequency and beatifull bass response with authoritative control.
The electronics circuit is based on all soslid
state device as transistor and fet (input device) non any I-C chip integrated
circuit is on the signal path! (The IC cannot delivery hi current!)
The amplifier has 5
five hi-level line inputs and a pair of speakers
system output
and a tape record
output.
Sonic performance
delivers pure enjoyment: thanks to the direct signal drive mosfet regulator by
tube circuits. What you listen is just the
sound of FET/BIPOLAR circuit operating with exceptional linearity in a
class A gain stage.
We can spend many
words trying to describe its purity, its great dynamics, its airy soundstage,
its accurate imaging, its ability to resolve the subtle details and many other
outstanding qualities of this integrated amplifier. But we prefer to simply invite you
to listen to it and to trust more what your hear.
S
P E C I F I C A T I O N :
|
E L E C T R I C A L
P E R F O R M A N C E
|
Unit description:
|
Stereo tube line level preamplifier with 5 inputs,2
main outputs, passive volume out, tape out, htd output
|
Tube active circuit:
|
6H30II, by
SATC
circuit: 6922/12AT7/12AU7/6CG7/12BH7
|
Frequency response:
|
20-50.000 Hz +/- 1 db
|
THD distorsion:
|
Less of 0.1 %
|
Input sensibility and gain:
|
200 mV / 20 db gain / 50 kohm input
|
Output voltage and impedance:
|
20 Volt @ 250 ohm
|
Optional:
|
Remote control handset,cherry wood veenerede side
panels
|
Power supply main:
|
100V/120V/230V ac 70 V/A
|
Dimension, weight (net):
|
400 (L) x 110 (H) x 300 (D)
Kg.10
|
E L E C T R I C A L
P E R F O R M A N C E
|
Unit description:
|
Stereo tube line level preamplifier with 5 inputs,2
main outputs, passive volume out, tape out, htd output
|
Tube active circuit:
|
6H30II, by
SATC
circuit: 6922/12AT7/12AU7/6CG7/12BH7
|
Frequency response:
|
20-50.000 Hz +/- 1 db
|
THD distorsion:
|
Less of 0.1 %
|
Input sensibility and gain:
|
200 mV / 20 db gain / 50 kohm input
|
Output voltage and impedance:
|
20 Volt @ 250 ohm
|
Optional:
|
Remote control handset,cherry wood veenerede side
panels
|
Power supply main:
|
100V/120V/230V ac 70 V/A
|
Dimension, weight (net):
|
400 (L) x 110 (H) x 300 (D)
Kg.10
|
Unit
description:
|
Stereo integrated power amplifier |
active circuit:
|
Fet/Bipolar
all genuine transistor
|
Frequency
response:
|
20 - 500.000 Hz +/- 1 db
|
THD
distorsion:
|
Less of 0.01 %
|
Input
sensibility and gain:
|
200
m V / 50 kohm input
|
Output
power:
|
60
Watt RMS on 8 ohm / 100 Watt RMS on 4 ohm |
Optional:
|
Cherry wood
veenerede side panels
Remote
control handset circuit
|
Power
supply main:
|
100V / 120V / 230V ac
250 V /
A
(factory set)
|
Dimension,
weight (net):
|
400 (L) x 110 (H) x 300 (D)
Kg.10
net
|
|
|
|
Download more info:
at top right of this page |
|