D i g i t u be S -1 9 2 [ version-usb-3 ]
hi-resolution tube output digital to analog converter with 5 digital selectable inputs
high speed class 2 USB @ 192 khz 24 bit
"God created the bumblebee , physicists, engineers, scientists, argue that the bumblebee cannot fly, wings are too small and too big body,
but the bumblebee does not know it and continues to fly ..."
The new Digitube S-192 digital tube D to A converter is based on 24 bit dac from Burr Brown 1794 , high-resolution dac, output circuits is design around vacuum tube triode type
miniwatt as ECC-81/12AT7, no any solid state device between dac and tubes stage.
Digital signals are accepted up to 192 kHz 24-bit on all inputs, USB
input up to 192 Khz 24 Bit.
The Digitube S-192 is also equipped with high precision word clock input and
digital spdif output for general purpose application.
T h e d i g i t a l i n p u t s :
- Spdif IEC-958 as RCA connector @ resolution 192 Khz 24 bit
- Spdif IEC-958 as BNC connector @ resolution 192 Khz 24 bit
- AES-EBU AES-3 as XLR connector @ resolution 192 Khz 24 bit
- Opto toslink digital input @ resolution 192 Khz 24 bit
- Asyncronous USB PC/MAC/LINUX input @ resolution 192 Khz 24 bit support stable KS / WASAPI / ASIO protocol at high speed comunication
- Asio official driver supply from our driver
O u t p u t / i n p u t d i g i t a l s e r v i c e s :
- Word Clock (W.C.) clock input
- Spdif as BNC output
A n a l o g o u t p u t :
- Unbalanced output as 2.5 volt 250 ohm
P e r f o r m a n c e s :
Input selector by sequential single push button , memory for the last selected input, led dot indicator for selected input.
Led lock for spdif / aes-ebu inputs
Display frequency indicator for 32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 /
Windows driver for XP / Vista / Seven / 8 / 8.1/ 10 at 32 and 64 bit supplied by download, update service by email inquiry
No any driver required for OSX-Apple mac include 10.9 and LINUX computer ( the USB interface is native as real USB-2)
Type of Unit |
Digital to Analog converter with usb input |
Output impedance |
< /= 250 ohm |
Jitter interface |
20 ps |
Frequency Response |
15 - 192 kHz +/- 1 dB @ hi-res input 192 Khz |
Input digital Impedance |
75 ohm spdif / 110 ohm aes-3 |
Harmonic Distortion |
THD < 0.1 % |
S/N Ratio |
100 dB ( A-weighted ) |
Tube output |
E C C - 8 1 / 1 2 A T 7 x 2 selected |
|
|
AC Main Voltages |
100/110/230/240 VAC - 50/60 Hz - 80 VA |
Dimensions ( W x D x H ) |
430 mm x 300 mm x 110 mm (feet include) |
Weight ( Net - Gross ) |
8 kg - 10 kg |
>>>>>> Measurement link page as real and true test of Digitube S-192 ( right measurement need to setup Digitube as "TEST mode" ) <<<<<<<
For best AES-EBU interconnect recommend the DIGILINK Lector cables |
|
AES-EBU cable available as 90 cm ( Digilink 1) 130 cm (Digilink 2) |
DRIVER UPDATE SERVICES :
Firmware / driver update available on request by email as only registered products, no any driver available on web site
Aggiornamenti Firmware / driver disponibili solo su richiesta con email per prodotti registrati, non sono disponibili driver sul web